10 HL Three Vessel Brewhouse Equipment
- Nov 10, 2022
- 77
- beer
10 HL Three Vessel Brewhouse Equipment
Brief introduction
The brewhouse is designed to conduct the brewing process of mashing, lautering, boiling and whirlpooling. When the capacity exceeds 10 HL, three vessel brewhouse is preferred by increasing brewmasters. Firstly, the mash tun, lauter tun, brew kettle and whirlpool tun can be combined variously according to different intention. Secondly, the brewmaster can brew 2 batches at the same time and the total capacity will be up to 3-4 batches per day, which means the three vessel brewhouse owns a bigger expanding capacity. These improvements guarantee the brewmaster make full use of the brewhouse equipment and bring comparable profits to the owner.
Quick overview of 10 HL three vessel brewhouse
Main configuration of 10 HL three vessel brewhouse
A. 10 HL Mash tun
-3mm interior shell and 2mm exterior shell
-Acid washing&passivating the Interior Finish to 0.2~0.4 μm
-80mm rock wool for insulation
-Stainless steel manway
-Agitator with VFD controlled motor and turbine reducer
B. 10 HL Lauter tun
-3mm Interior Shell and 2mm exterior Shell
-Acid washing&passivating the Interior Finish to 0.2~0.4 μm
-80mm rock wool for insulation
-Stainless steel manway
-CIP spraying ball and sparging ring
-Side mounted grain outdoor with grain chute
-Grain rake and scraper blade with VFD controlled motor& turbine reducer
-False Bottom/Filter
C. 10 HL Brew kettle
-3mm Interior Shell and 2mm exterior Shell
-Acid washing&passivating the Interior Finish to 0.2~0.4 μm
-80mm rock wool for insulation
-Stainless steel manway
-Sanitary leveling sight glass
-Steam vent with condensate ring for kettle stack
D. 10 HL Whirlpool tun
-3mm Interior Shell and 2mm exterior Shell
-Acid washing&passivating the Interior Finish to 0.2~0.4 μm
-80mm rock wool for insulation
-Stainless steel manway
-Anticlockwise Tangential whirlpool inlet in Northern Hemisphere
Clockwise tangential whirlpool inlet in Southern Hemisphere
E: Other auxiliary equipment
-10 HL-20 HL hot liquor tun with steam heating
-8m2 heat exchanger
-3T mash, wort and hot liquor pump
-20L hopback
-20L yeast feeder
-PID or PLC control Panel
Contact us immediately to get latest specification and price of 10 HL three vessel brewhouse.
Brief introduction
The brewhouse is designed to conduct the brewing process of mashing, lautering, boiling and whirlpooling. When the capacity exceeds 10 HL, three vessel brewhouse is preferred by increasing brewmasters. Firstly, the mash tun, lauter tun, brew kettle and whirlpool tun can be combined variously according to different intention. Secondly, the brewmaster can brew 2 batches at the same time and the total capacity will be up to 3-4 batches per day, which means the three vessel brewhouse owns a bigger expanding capacity. These improvements guarantee the brewmaster make full use of the brewhouse equipment and bring comparable profits to the owner.
Quick overview of 10 HL three vessel brewhouse
| Structure: |
10 HL mash tun+10 HL lauter tun+10 HL kettle/whirlpool tun(with hot liquor tun) 10 HL mash/lauter tun+10 HL kettle tun+10 HL whirlpool tun(with hot liquor tun) 10 HL mash/kettle tun+10 HL lauter tun+10 HL whirlpool tun(with hot liquor tun) |
| Tank Capacity: | 10 HL (+25% Headspace minimum) |
| Tank size: | Φ1360x2500mm |
| Material: | Stainless steel, copper or brass |
| Batches/Day: | 3-4 batches per day |
| Heating Way: | Steam(direct fire for optional) |
| Electric Power: | 3phase/380(220,415,440...)v/50(60)Hz |
| Note: | Note: 1hl=100liter; 1Gallon=3.7854liter; 1Barrel (BBL) =117Liter; |
Main configuration of 10 HL three vessel brewhouse
A. 10 HL Mash tun
-3mm interior shell and 2mm exterior shell
-Acid washing&passivating the Interior Finish to 0.2~0.4 μm
-80mm rock wool for insulation
-Stainless steel manway
-Agitator with VFD controlled motor and turbine reducer
B. 10 HL Lauter tun
-3mm Interior Shell and 2mm exterior Shell
-Acid washing&passivating the Interior Finish to 0.2~0.4 μm
-80mm rock wool for insulation
-Stainless steel manway
-CIP spraying ball and sparging ring
-Side mounted grain outdoor with grain chute
-Grain rake and scraper blade with VFD controlled motor& turbine reducer
-False Bottom/Filter
C. 10 HL Brew kettle
-3mm Interior Shell and 2mm exterior Shell
-Acid washing&passivating the Interior Finish to 0.2~0.4 μm
-80mm rock wool for insulation
-Stainless steel manway
-Sanitary leveling sight glass
-Steam vent with condensate ring for kettle stack
D. 10 HL Whirlpool tun
-3mm Interior Shell and 2mm exterior Shell
-Acid washing&passivating the Interior Finish to 0.2~0.4 μm
-80mm rock wool for insulation
-Stainless steel manway
-Anticlockwise Tangential whirlpool inlet in Northern Hemisphere
Clockwise tangential whirlpool inlet in Southern Hemisphere
E: Other auxiliary equipment
-10 HL-20 HL hot liquor tun with steam heating
-8m2 heat exchanger
-3T mash, wort and hot liquor pump
-20L hopback
-20L yeast feeder
-PID or PLC control Panel
Contact us immediately to get latest specification and price of 10 HL three vessel brewhouse.
.jpg)