6HL Single wall beer fermenter
- Jun 22, 2025
- 138
- breweryequipment
6HL Single wall beer fermenter
Brief introduction
Compared with the double wall beer fermenter, the single wall beer fermenter doesn’t have exterior shell or insulation. And it is usually placed in the refrigeration house/walk-in cold room to control the temperature of fermenting. Other than different structure, the function of single wall beer fermenter is same with double wall stainless steel beer fermenter. So if you do have an idle walk-in cold room, the single wall beer fermenter would be a good choice to save a part of cost.
Quick view of 6HL single wall beer fermenter
Main configuration of 6HL single wall beer fermenter
- Shell: SUS304 full welded TH=3mm
-100% TIG welding with pure argon gas shield
-Interior Finish: Overall polishing to 0.2~0.4 μm without dead corner
-Dished head and 60 degree cone bottom
-CIP arm with 360° coverage CIP spraying ball
-Mechanical relief valve 2 bar on CIP arm
-Shockproof pressure gauge on CIP arm
-Rotating racking arm and port on cone with butterfly valve
-Tri clamp discharge arm with butterfly valve
-Thermowell for high accuracy temperature sensor
-Level tube for special request
-Carbonation port and stone for special request
Contact us immediately to get latest specification and price of 6HL single wall beer fermenter
Brief introduction
Compared with the double wall beer fermenter, the single wall beer fermenter doesn’t have exterior shell or insulation. And it is usually placed in the refrigeration house/walk-in cold room to control the temperature of fermenting. Other than different structure, the function of single wall beer fermenter is same with double wall stainless steel beer fermenter. So if you do have an idle walk-in cold room, the single wall beer fermenter would be a good choice to save a part of cost.
Quick view of 6HL single wall beer fermenter
| Capacity | 6HL |
| Dimension | Φ900mmx2150mm |
| Placement | Refrigeration house/walk-in cold room |
| Body of Tank | Dished head and conical bottom |
| Degree of Conical Bottom | 60 degree or customizing |
| Location of Manway | Top mounted manway |
| Dry Hopping Port | No |
| Insulation | No |
| Glycol Jacket | No |
| Heavy Duty Leg | 4 pcs |
| Carbonation Device | Optional |
Main configuration of 6HL single wall beer fermenter
- Shell: SUS304 full welded TH=3mm
-100% TIG welding with pure argon gas shield
-Interior Finish: Overall polishing to 0.2~0.4 μm without dead corner
-Dished head and 60 degree cone bottom
-CIP arm with 360° coverage CIP spraying ball
-Mechanical relief valve 2 bar on CIP arm
-Shockproof pressure gauge on CIP arm
-Rotating racking arm and port on cone with butterfly valve
-Tri clamp discharge arm with butterfly valve
-Thermowell for high accuracy temperature sensor
-Level tube for special request
-Carbonation port and stone for special request
Contact us immediately to get latest specification and price of 6HL single wall beer fermenter
.jpg)
